SATO CL608 Manuale di Servizio Pagina 152
- Pagina / 245
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Page 7-6
Section 7. Factory Resets
SATO CL608e/CL612e Service Manual PN 9001079
Rev. A
7.6 Clear EEPROM
STEP PROCEDURE
1. Record all current dip switch positions, then place all switches in the OFF
position.
2. Place the DSW2-4 in the ON or up postion.
3. Press the LINE and FEED key while simultaneously turning ON the power
switch. When the printer beeps, release the keys. The following screens will
appear.
4. Place the DSW-4 in the OFF postion and the following screen will appear.
5. Press the LINE key to display the next screen.
6. Press the FEED key to display the next screen.
7. Press the FEED key to display the next screen.
8. Press the LINE key to select YES or NO. If YES is selected press the FEED key
to clear the EEPROM .
9. Power OFF the printer and confirm that all switches are in the OFF or down
position.
all clear mode
factory mode
initializing
rom v00.00.00.00
maintenance mode
dipsw2-4 on->off
all clear
counter eeprom
counter all clear
yes no
To clear the EEPROM, perform the following steps.
Caution: Resetting the printer will clear all registers.
counter all clear
completed
all clear mode
- CL608e/CL612e Printers 1
- Service Manual 1
- PN 9001079 2
- Table of Contents 3
- Overview and Specifications 7
- 1.2 Physical Characteristics 8
- 1.3 Printer Features 9
- Rear Panel 9
- Printer Features 10
- 1.4 Operation Panel/Displays 11
- Operation Panel/Displays 12
- 1.5 Components 13
- 1.6 Sensors and Switches 14
- Components 14
- Switches and Sensors 15
- 1.9 Optional Accessories 16
- 1.7 Ribbon 16
- Page 1-11 17
- Page 1-12 18
- Page 1-13 19
- 1.12 Character Fonts 20
- 1.13 Bar Codes 21
- Page 1-16 22
- Configuration 23
- Dip Switch Settings 24
- DEFAULT SETTING 29
- COMPLETED 29
- 2.3 LCD Panel Configuration 30
- LCD Panel — Normal Mode 31
- PRINT speed 32
- LCD Panel— Advanced Mode 35
- Print offset 36
- 00/00/00 00:00 37
- Advanced Mode 38
- Card Memory 39
- LCD Panel — Card Mode 40
- Card format 46
- ADVANCED MODE 47
- LCD Panel — Service Mode 48
- LCD Panel — Counters Mode 54
- Test Print Mode 55
- LCD Panel — Test Print Mode 56
- Default Setting Mode 56
- LCD Panel — Maintenance Mode 58
- All Clear Mode 58
- Alt. Protocol 59
- Default Complete 59
- User Download 59
- Press the Line Key 59
- Hex Dump Mode 60
- 2.4 Sample Test Labels 62
- Interface Specifications 63
- Interface Types 64
- 3.3 The Receive Buffer 65
- The Receive Buffer 66
- IEEE 1284 Parallel Interface 67
- 3.5 RS232C Serial Interface 68
- RS232C Serial Interface 69
- Page 3-8 70
- X-On/X-Off Flow Control 71
- Data Streams 71
- 3.7 Ethernet Interface 72
- Standard Operation 74
- Repeat Print 75
- Error Signals 75
- Page 3-14 76
- 4.1 Overview 77
- Page 4-2 78
- 4.3 DC Power Voltage Checks 79
- DC Power Voltage Checks 80
- TSUJDAOTRVMETI 82
- 1RVssenkraD 82
- 2RVtesffO 82
- 3RVhctiP 82
- 4RVyalpsiD 82
- Page 4-7 83
- Page 4-8 84
- Page 4-9 85
- 4.6 Label Gap Adjustment 86
- 4.7 Eye-Mark Adjustment 87
- Page 4-12 88
- Ribbon end 89
- 4.10 Ribbon Sensor Adjustment 90
- 4.11 LCD Display Adjustment 91
- 1(L) 2(M) 3(D) 92
- Mechanical Adjustments 93
- Fig. 5-1 94
- Ribbon Clutch Adjustments 95
- Page 5-5 97
- NELLAFONOITATOR 98
- DAEHTNIRPFOTNEMEVOM 98
- ESIWKCOLCTNORFEHTOT 98
- ESIWKCOLC-RETNUOCDRAWKCAB 98
- Fig. 5-8 99
- 5.5 Ribbon Roller Adjustment 100
- Page 5-9 101
- Fig. 5-10 102
- Fig. 5-11 102
- Fig. 5-12 102
- Fig. 5-13 102
- Fig. 5-15 103
- Fig. 5-14 103
- POSITION 104
- UNLATCHED 104
- Page 5-13 105
- Page 5-14 106
- Replacement Procedures 107
- Fig. 6-1 108
- Figs. 6-2 109
- Figs. 6-3 110
- * CAREFULLY PRESS OUTWARD 111
- Figs. 6-5 112
- 6.3 Replacing the Fuses 113
- Replacing the Fuses 114
- Page 6-9 115
- Replacing the Power Supply 116
- Fig. 6-16 118
- Fig. 6-17 118
- Fig. 6-18 118
- Fig. 6-19 119
- Replacing the Timing Belts 120
- 6.7 Replacing the Print Head 122
- Replacing the Print Head 123
- 6.8 Replacing the Platen 125
- Replacing the Platen 126
- Page 6-23 129
- Page 6-24 130
- Page 6-25 131
- Fig. 6-45 132
- Fig. 6-46 132
- Fig. 6-47 132
- Fig. 6-48 132
- Fig. 6-49 133
- Fig. 6-50 134
- Fig. 6-51 134
- Fig. 6-52 134
- Fig. 6-53 134
- Fig. 6-54 135
- Fig. 6-55 135
- SENSOR LOCATIONS 136
- Fig. 6-57 136
- Fig. 6-56 136
- Page 6-31 137
- Fig. 6-59 138
- Fig. 6-58 138
- Fig. 6-60 138
- Fig. 6-62 139
- Fig. 6-61 139
- Fig. 6-63 139
- Fig. 6-64 140
- Fig. 6-65 141
- Fig. 6-66 141
- Fig. 6-67 141
- Fig. 6-68 141
- Fig. 6-69 141
- Fig. 6-70 142
- Fig. 6-72 142
- Fig. 6-73 142
- Fig. 6-74 142
- Fig. 6-71 142
- Fig. 6-75 143
- Fig. 6-76 144
- Fig. 6-77 144
- Fig. 6-78 144
- Fig. 6-79 144
- Fig. 6-81 145
- Fig. 6-82 145
- Fig. 6-80 145
- Page 6-40 146
- Factory Resets 147
- STEP PROCEDURE 148
- 7.3 Clear Head Counters 149
- 7.4 Clear Dispenser Counter 150
- 7.5 Clear Cutter Counter 151
- 7.6 Clear EEPROM 152
- 7.7 Sample Test Prints 153
- Page 7-8 154
- Section 7. Factory Resets 154
- Troubleshooting 155
- 8.2 Initial Check List 156
- Page 8-3 157
- Section 8. Troubleshooting 157
- Page 8-4 158
- 8.6 Lan Ethernet Interface 159
- Intermittent Problems 160
- TCP/IP Troubleshooting 160
- NetWare Troubleshooting 161
- Page 8-8 162
- Resetting the Print Server 163
- 8.7 Error Signals 164
- 8.8 Troubleshooting Tables 165
- Print Quality Problems 166
- 8.9 Head Pattern Examples 169
- Head Pattern Examples 170
- Print Buffer Hex Dump 171
- Receive Buffer Hex Dump 171
- Page 8-18 172
- Optional Accessories 173
- Page 9-2 174
- Label Cutter Kit Installation 175
- Components as 178
- Supplied in Kit 178
- Label Dispenser Installation 179
- Page 9-15 187
- Page 9-16 188
- Fig. 9-20 189
- Fig. 9-21 189
- Fig. 9-22 190
- Figs. 9-25 192
- Fig. 9-23 192
- Fig. 9-26 193
- Figs. 9-27 194
- Factory Reset Procedure 195
- Set Calendar 196
- Set Calendar (Cont) 197
- Page 9-26 198
- Spare Parts List 199
- 10.2 Base Cover Assembly 200
- Base Cover Assembly 201
- 10.3 Frame Assembly 209
- Frame Assembly 210
- 10.4 Print Head Assembly 216
- Print Head Assembly 217
- 10.5 Ribbon Assembly 220
- Ribbon Assembly 221
- 10.6 Feed Roller Assembly 225
- Feed Roller Assembly 226
- 10.7 Main PCB Assembly 228
- 10.8 Interface Option 229
- Page 10-32 230
- Section 10. Parts List 230
- Dispenser Assembly Option 231
- 10.10 Cutter Assembly Option 237
- Cutter Assembly Option 238
- 10.11 PCMCIA Memory Option 241
- Page 10-44 242
Prodotti e manuali riguardandi Stampanti per etichette SATO CL608
Stampanti per etichette SATO CG412 Specifiche
(100 pagine)
(100 pagine)
Stampanti per etichette SATO CL608 Specifiche
(58 pagine)
(58 pagine)
Stampanti per etichette SATO M-84PRO Specifiche
(52 pagine)
(52 pagine)
Stampanti per etichette SATO CL408e Specifiche
(10 pagine)
(10 pagine)
Stampanti per etichette SATO LM408e Specifiche
(86 pagine)
(86 pagine)
Stampanti per etichette SATO TH2 Manuale Utente
(15 pagine)
(15 pagine)
(87 pagine)
Stampanti per etichette SATO M-10E Specifiche
(82 pagine)
(82 pagine)
Stampanti per etichette SATO M-84PRO Specifiche
(82 pagine)
(82 pagine)
Stampanti per etichette SATO RFID Manuale Utente
(26 pagine)
(26 pagine)
Stampanti per etichette SATO CL608VA Specifiche
(212 pagine)
(212 pagine)
(86 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale